Back To Index  <<  Back To Templates

ref Template  Laborergebnisse (Laboratory Observation)

Id 1.3.6.1.4.1.19376.1.3.1.6 Gültigkeit gültig ab 2013‑11‑07

Es gibt Versionen von Templates mit dieser Id:
  • LaboratoryObservation vom 2015‑03‑26
  • LaboratoryObservation vom 2014‑12‑06
  • LaboratoryObservation vom 2014‑03‑04
  • LaboratoryObservation vom 2013‑11‑07
Status retired Obsolet Versions-Label
Name LaboratoryObservation Anzeigename Laborergebnisse (Laboratory Observation)
Kontext Elternknoten des Template-Element mit Id 1.3.6.1.4.1.19376.1.3.1.6
Klassifikation CDA Entry Level Template
Offen/Geschlossen Offen (auch andere als die definierten Elemente sind erlaubt)
Benutzt von / Benutzt
Benutzt von 0 Templates, Benutzt 3 Templates
Benutzt Template-Id als Name Version
1.2.40.0.34.11.4.3.2 Containment active Befundtext (Anmerkungen und Kommentare) DYNAMIC
1.2.40.0.34.11.90001 Inklusion active PersonElements DYNAMIC
1.2.40.0.34.11.90002 Inklusion active OrganizationElements DYNAMIC
Item DT Kard Konf Beschreibung Label
hl7:observation
(LaboratoryObservation)
@classCode
1 … 1 F OBS
@moodCode
1 … 1 F EVN
hl7:templateId
II 1 … 1 (LaboratoryObservation)
@root
1 … 1 F 1.3.6.1.4.1.19376.1.3.1.6
hl7:id
II 0 … 1 (LaboratoryObservation)
hl7:code
CE 1 … 1 (LaboratoryObservation)
  CONF
Der Wert von @code muss gewählt werden aus dem Value Set 1.2.40.0.34.10.44 ELGA_Laborparameter (DYNAMIC)
  Schematron assert role red error  
  test not(@nullFlavor) or @nullFlavor!='OTH' or (hl7:originalText and hl7:translation)  
  Meldung Wenn code/@nullFlavor=OTH dann MUSS code/originalText und code/translation anwesend sein.  
hl7:text
ED 0 … 1 (LaboratoryObservation)
hl7:statusCode
CS 1 … 1 M (LaboratoryObservation)
  CONF
@code muss "completed" sein
oder
@code muss "aborted" sein
hl7:effectiveTime
TS 1 … 1 (LaboratoryObservation)
hl7:value
0 … 1 C Physikalisch Einheit des Messwertes. UCUM Codierung empfohlen. (LaboratoryObservation)
  Constraint Konditionale Konformität:
  • Bei EIS "Basic" 1..1 R2 Codierung der Einheit erforderlich (im Element translation)
  • Bei EIS "Enhanced" 1..1 M Codierung der Einheit nach UCUM erforderlich
hl7:translation
PQR 0 … 1 Alternative Repräsentation derselben physikalischen Größe, mit unterschiedlicher Einheit in @code und @codeSystem und einem möglicherweise unterschiedlichen Wert. (LaboratoryObservation)
hl7:interpretationCode
CE 0 … * (LaboratoryObservation)
  CONF
Der Wert von @code muss gewählt werden aus dem Value Set 1.2.40.0.34.10.13 ELGA_ObservationInterpretation (DYNAMIC)
hl7:entryRelationship
0 … * Beinhaltet 1.2.40.0.34.11.4.3.2 Befundtext (Anmerkungen und Kommentare) (DYNAMIC) (LaboratoryObservation)
treeblank wo [hl7:act [hl7:templateId [@root='1.2.40.0.34.11.4.3.2']] [hl7:templateId [@root='2.16.840.1.113883.10.20.1.40']] [hl7:templateId [@root='1.3.6.1.4.1.19376.1.5.3.1.4.2']]]
@typeCode
1 … 1 F COMP
hl7:participant
0 … 1 (LaboratoryObservation)
@typeCode
1 … 1 F AUTHEN
hl7:templateId
II 1 … 1 (LaboratoryObservation)
@root
1 … 1 F 1.3.6.1.4.1.19376.1.3.3.1.5
hl7:time
IVL_TS 1 … 1 (LaboratoryObservation)
hl7:participantRole
(LaboratoryObservation)
hl7:id
II 1 … 1 M (LaboratoryObservation)
hl7:addr
AD 1 … 1 (LaboratoryObservation)
hl7:telecom
TEL.AT 1 … * (LaboratoryObservation)
hl7:playingEntity
1 … 1 M (LaboratoryObservation)
hl7:name
PN 1 … 1 M (LaboratoryObservation)
hl7:referenceRange
0 … * (LaboratoryObservation)
@typeCode
1 … 1 F REFV
  Beispiel <referenceRange typeCode="REFV">
  <observationRange classCode="OBS" moodCode="EVN.CRT">
    <!-- text: reference range with preconditions -->
    <text>43.0 - 49.0</text>    <value xsi:type="IVL_PQ">
      <low value="43.0" unit="%"/>      <high value="49.0" unit="%"/>    </value>
    <interpretationCode code="N" codeSystem="2.16.840.1.113883.5.83" codeSystemName="HL7.ObservationInterpretation"/>  </observationRange>
</referenceRange>
  Beispiel <referenceRange typeCode="REFV">
  <observationRange classCode="OBS" moodCode="EVN.CRT">
    <!-- text: reference range with preconditions -->
    <text>&gt;40</text>    <value xsi:type="IVL_PQ">
      <low value="40.0" unit="%" inclusive="false"/>    </value>
    <interpretationCode code="N" codeSystem="2.16.840.1.113883.5.83" codeSystemName="HL7.ObservationInterpretation"/>  </observationRange>
</referenceRange>
  Beispiel <referenceRange typeCode="REFV">
  <observationRange classCode="OBS" moodCode="EVN.CRT">
    <!-- text: reference range with preconditions -->
    <text> Phase 1: 43.0 - 49.0 Phase 2: 45.0 – 55.0 1835 Phase 3: 49.0 – 63.0 </text>    <interpretationCode code="H" codeSystem="2.16.840.1.113883.5.83"/>  </observationRange>
</referenceRange>
hl7:observationRange
1 … 1 M (LaboratoryObservation)
@classCode
1 … 1 F OBS
@moodCode
1 … 1 F EVN.CRT
hl7:text
ED 0 … 1 (LaboratoryObservation)
hl7:value
IVL_PQ 0 … 1 (LaboratoryObservation)
hl7:low
PQ 1 … 1 (LaboratoryObservation)
hl7:high
PQ 1 … 1 (LaboratoryObservation)
hl7:interpretationCode
CE 1 … 1 M (LaboratoryObservation)
@code
CONF 1 … 1 F N
@codeSystem
1 … 1 F 2.16.840.1.113883.5.83 (Observation Interpretation)
hl7:performer
0 … * (LaboratoryObservation)
@typeCode
1 … 1 F PRF
hl7:templateId
II 1 … 1 (LaboratoryObservation)
@root
1 … 1 F 1.3.6.1.4.1.19376.1.3.3.1.7
hl7:time
IVL_TS 1 … 1 (LaboratoryObservation)
hl7:assignedEntity
1 … 1 M (LaboratoryObservation)
hl7:id
II 1 … 1 M (LaboratoryObservation)
hl7:addr
AD 1 … 1 (LaboratoryObservation)
hl7:telecom
TEL.AT 1 … * (LaboratoryObservation)
hl7:assignedPerson
1 … 1 M (LaboratoryObservation)
Eingefügt von 1.2.40.0.34.11.90001 PersonElements (DYNAMIC)
@classCode
0 … 1 F PSN
@determinerCode
0 … 1 F INSTANCE
hl7:name
PN 1 … 1 (LaboratoryObservation)
hl7:representedOrganization
1 … 1 M (LaboratoryObservation)
Eingefügt von 1.2.40.0.34.11.90002 OrganizationElements (DYNAMIC)
@classCode
0 … 1 F ORG
@determinerCode
0 … 1 F INSTANCE
hl7:id
II 0 … * (LaboratoryObservation)
hl7:name
ON 1 … 1 (LaboratoryObservation)
hl7:telecom
TEL.AT 0 … * (LaboratoryObservation)
hl7:addr
AD 0 … 1 (LaboratoryObservation)