Back To Index  <<  Back To Templates

ref Template  eMedikation Rezept

Id 1.2.40.0.10.1.4.3.4.1.1.1 Gültigkeit gültig ab 2013‑12‑16
Status retired Obsolet Versions-Label
Name eMedikationRezept Anzeigename eMedikation Rezept
Beschreibung Template Spezieller Implementierungsleitfaden ELGA eMedikation Rezept
Kontext Geschwisterknoten des Template-Element mit Id 1.2.40.0.10.1.4.3.4.1.1.1
Label cdaemrez
Klassifikation CDA Document Level Template
Offen/Geschlossen Offen (auch andere als die definierten Elemente sind erlaubt)
Benutzt von / Benutzt
Benutzt von 1 Template, Benutzt 9 Templates
Benutzt von Template-Id als Name Version
1.2.40.0.34.11.10005 retired ELGA CDA Dokument eMedikation Rezept 2013‑12‑16
Benutzt Template-Id als Name Version
1.2.40.0.34.11.90008 Inklusion active CD effectiveTime DYNAMIC
1.2.40.0.34.11.90009 Inklusion active CD confidentialityCode DYNAMIC
1.2.40.0.34.11.90010 Inklusion active CD languageCode DYNAMIC
1.2.40.0.34.11.90007 Inklusion active SetId VersionNumber DYNAMIC
1.2.40.0.34.11.20001 Inklusion active HeaderRecordTarget DYNAMIC
1.2.40.0.34.11.20002 Inklusion active HeaderAuthor DYNAMIC
1.2.40.0.34.11.20004 Inklusion active HeaderCustodian DYNAMIC
1.2.40.0.34.11.20006 Inklusion active HeaderLegalAuthenticator DYNAMIC
1.2.40.0.34.11.8.1.2.1 Containment active Rezept Section DYNAMIC
Item DT Kard Konf Beschreibung Label
hl7:templateId
II 1 … 1 M Template Spezieller Implementierungsleitfaden ELGA eMedikation Rezept cdaemrez
@root
1 … 1 F 1.2.40.0.10.1.4.3.4.1.1.1
hl7:templateId
II 1 … 1 M IHE PHARM Prescription cdaemrez
@root
1 … 1 F 1.3.6.1.4.1.19376.1.9.1.1.1
hl7:templateId
II 1 … 1 M IHE PCC Medical Documents cdaemrez
@root
1 … 1 F 1.3.6.1.4.1.19376.1.5.3.1.1.1
hl7:templateId
II 1 … 1 M ELGA CDA Dokument in EIS "Full support" cdaemrez
@root
1 … 1 F 1.2.40.0.34.11.2.0.3
hl7:id
II 1 … 1 M cdaemrez
@root
1 … 1 F 1.2.40.0.10.1.4.3.4.2.1
@extension
1 … 1 R
@assigningAuthorityName
0 … 1 F Österreichisches e-Medikationsprojekt
hl7:code
CE 1 … 1 M cdaemrez
@code
CONF 1 … 1 F 57833-6
@displayName
1 … 1 F Prescriptions
@codeSystem
1 … 1 F 2.16.840.1.113883.6.1 (LOINC)
  Beispiel <code code="57833-6" displayName="Prescriptions" codeSystem="2.16.840.1.113883.6.1" codeSystemName="LOINC"/>
hl7:title
ST 1 … 1 M Der Titel des Dokuments ist für den lesenden Dokumentempfänger das sichtbare Element. Dieser wird nicht dem Attribut displayName des Elements code entnommen, sondern dem (verpflichtenden) Element title. cdaemrez
  CONF
Elementinhalt muss "Rezept" sein
Eingefügt von 1.2.40.0.34.11.90008 CD effectiveTime (DYNAMIC)
hl7:effectiveTime
TS.AT.TZ 1 … 1 cdaemrez
Eingefügt von 1.2.40.0.34.11.90009 CD confidentialityCode (DYNAMIC)
hl7:confidentialityCode
CE 1 … 1 cdaemrez
@code
CONF 1 … 1 F N
@codeSystem
1 … 1 F 2.16.840.1.113883.5.25 (Confidentiality)
@displayName
1 … 1 F normal
  Beispiel <confidentialityCode code="N" codeSystem="2.16.840.1.113883.5.25" displayName="normal"/>
Eingefügt von 1.2.40.0.34.11.90010 CD languageCode (DYNAMIC)
hl7:languageCode
CS.LANG 1 … 1 cdaemrez
@code
CONF 1 … 1 F de-AT
  Beispiel <languageCode code="de-AT"/>
Eingefügt von 1.2.40.0.34.11.90007 SetId VersionNumber (DYNAMIC)
hl7:setId
II 1 … 1 cdaemrez
  Beispiel <setId extension="D1127" root="1.2.276.0.76.3.1.139.2.427"/>
hl7:versionNumber
INT.NONNEG 1 … 1 cdaemrez
  Beispiel <versionNumber value="1"/>
Eingefügt 1 … 1 M von 1.2.40.0.34.11.20001 HeaderRecordTarget (DYNAMIC)
hl7:recordTarget
1 … 1 M cdaemrez
@typeCode
0 … 1 F RCT
@contextControlCode
0 … 1 F OP
  Beispiel <recordTarget typeCode="RCT" contextControlCode="OP">
  <patientRole classCode="PAT">
    <!-- ... -->
  </patientRole>
</recordTarget>
hl7:patientRole
1 … 1 cdaemrez
@classCode
0 … 1 F PAT
  Beispiel <patientRole classCode="PAT">
  <id extension="186245" root="1.2.276.0.76.3.1.139.3.871"/>  <patient classCode="PSN" determinerCode="INSTANCE">
    <!-- ... -->
  </patient>
</patientRole>
  Schematron assert role red error  
  test string-length(hl7:id[1]/@root)>0  
  Meldung patientRole id[1] MUSS als lokale Patienten ID vom System vorhanden sein  
  Schematron assert role red error  
  test hl7:id[2]/@root = '1.2.40.0.10.1.4.3.1' or hl7:id[2]/@nullFlavor='NI' or hl7:id[2]/@nullFlavor='UNK'  
  Meldung patientRole id[2] MUSS Sozialversicherungsnummer des Patienten sein (1.2.40.0.10.1.4.3.1) oder @nullFlavor 'NI' oder 'UNK' ist angegeben  
hl7:id
II 2 … * cdaemrez
  Beispiel <!-- lokale Patienten ID vom System, notwendig für XDS -->
<id root="1.2.40.0.34.99.111.1.2" extension="4711" assigningAuthorityName="Amadeus Spital"/>
  Beispiel <!-- Patienten SV Nummer -->
<id root="1.2.40.0.10.1.4.3.1" extension="1234241270" assigningAuthorityName="Österreichische Sozialversicherung"/>
hl7:addr
AD 0 … 1 cdaemrez
  Beispiel <!--
Adresse des Patienten (siehe Allgemeiner Leitfaden, Kapitel 6.3.1.2.3)
Granularitätsstufen beachten
-->
<addr use="H">
  <streetAddressLine>Musterstraßen 13a</streetAddressLine>  <postalCode>7000</postalCode>  <city>Eisenstadt</city>  <state>Burgenland</state>  <country>AUT</country></addr>
hl7:streetAddressLine
0 … 1 cdaemrez
hl7:streetName
0 … 1 cdaemrez
hl7:houseNumber
0 … 1 cdaemrez
  Schematron assert role red error  
  test hl7:streetAddressLine or (hl7:streetName and hl7:houseNumber)  
  Meldung Granularitätsstufen Adresse beachten: streetAddressLine oder streetName+houseNumber  
hl7:postalCode
1 … 1 M cdaemrez
hl7:city
1 … 1 M cdaemrez
hl7:state
0 … 1 C cdaemrez
hl7:country
1 … 1 M cdaemrez
hl7:additionalLocator
0 … 1 cdaemrez
hl7:telecom
TEL.AT 0 … * cdaemrez
  Beispiel <!--
Kontaktdaten des Patienten (siehe Allgemeiner Leitfaden, Kapitel 6.3.1.2.4)
-->
<telecom use="H" value="tel:+43.1.40400"/>
  Beispiel <telecom use="MC" value="tel:+43.664.1234567"/>
  Beispiel <telecom value="mailto:herberthannes.mustermann@provider.at"/>
hl7:patient
0 … 1 cdaemrez
@classCode
0 … 1 F PSN
@determinerCode
0 … 1 F INSTANCE
  Beispiel <patient classCode="PSN" determinerCode="INSTANCE">
  <name>
    <!-- ... -->
  </name>
  <administrativeGenderCode code="M" codeSystem="2.16.840.1.113883.5.1"/>  <birthTime value="19541223"/></patient>
hl7:name
PN 1 … 1 M cdaemrez
  Beispiel <name>
  <given>Johannes</given>  <family>Tremener</family></name>
hl7:prefix
0 … * cdaemrez
hl7:given
1 … * M cdaemrez
hl7:family
1 … * M cdaemrez
hl7:suffix
0 … * cdaemrez
hl7:administrativeGenderCode
CE 1 … 1 R cdaemrez
  CONF
Der Wert von @code muss gewählt werden aus dem Value Set 1.2.40.0.34.10.4 ELGA_AdministrativeGender (DYNAMIC)
  Beispiel <administrativeGenderCode code="M" codeSystem="2.16.840.1.113883.5.1"/>
hl7:birthTime
TS.DATE.MIN 1 … 1 cdaemrez
  Beispiel <!--
Geburtsdatum des Patienten (siehe Allgemeiner Leitfaden, Kapitel 6.3.1.2.7)
-->
<birthTime value="19491224"/>
hl7:maritalStatusCode
CE 0 … 1 cdaemrez
  CONF
Der Wert von @code muss gewählt werden aus dem Value Set 1.2.40.0.34.10.11 ELGA_MaritalStatus (DYNAMIC)
  Beispiel <!--
Familienstand des Patienten (siehe Allgemeiner Leitfaden, Kapitel 6.3.1.2.8)
-->
<maritalStatusCode code="S" displayName="Never Married" codeSystem="2.16.840.1.113883.5.2"/>
hl7:religiousAffiliationCode
CE 0 … 1 cdaemrez
  CONF
Der Wert von @code muss gewählt werden aus dem Value Set 1.2.40.0.34.10.18 ELGA_ReligiousAffiliation (DYNAMIC)
  Beispiel <!--
Religionszugehörigkeit des Patienten (siehe Allgemeiner Leitfaden, Kapitel 6.3.1.2.9)
-->
<religiousAffiliationCode code="101" displayName="Römisch-Katholisch" codeSystem="2.16.840.1.113883.2.16.1.4.1"/>
hl7:raceCode
NP cdaemrez
hl7:ethnicGroupCode
NP cdaemrez
hl7:guardian
0 … * cdaemrez
  Beispiel <!--
Vormund/Sachwalter des Patienten (siehe Allgemeiner Leitfaden, Kapitel 6.3.1.2.12)
"Organisation"
-->
<guardian>
  <!--
Adresse der Vermunds/Sachwalters (Organisation)
-->
  <addr>
    <streetAddressLine>Kinderdorfstraße 1</streetAddressLine>    <postalCode>2371</postalCode>    <city>Hinterbrühl</city>    <state>Niederösterreich</state>    <country>AUT</country>  </addr>
  <!--
Kontaktdaten des Vormunds/Sachwalters (Organisation)
-->
  <telecom use="H" value="tel:+1-608-443-2928"/>  <telecom use="WP" value="tel:+1-608-271-9000"/>  <guardianOrganization>
    <!--
Name der Vormund/Sachwalter-Organisation
-->
    <name>SOS Kinderdorf Hinterbrühl</name>  </guardianOrganization>
</guardian>
hl7:addr
AD 0 … 1 cdaemrez
hl7:telecom
TEL.AT 0 … * cdaemrez
Auswahl 1 … 1 Elemente in der Auswahl:
  • hl7:guardianPerson
  • hl7:guardianOrganization
hl7:guardianPerson
 … 1 cdaemrez
hl7:name
PN 1 … 1 M cdaemrez
hl7:guardianOrganization
 … 1 cdaemrez
hl7:name
ON 1 … 1 M cdaemrez
hl7:birthplace
0 … 1 cdaemrez
  Beispiel <!--
Geburtsort des Patienten (siehe Allgemeiner Leitfaden, Kapitel 6.3.1.2.13)
-->
<birthplace>
  <place>
    <addr>Graz</addr>  </place>
</birthplace>
hl7:place
1 … 1 M cdaemrez
hl7:addr
AD 1 … 1 M cdaemrez
Eingefügt von 1.2.40.0.34.11.90017 Language Communication (DYNAMIC)
hl7:languageCommunication
0 … * cdaemrez
  Beispiel <languageCommunication>
  <languageCode code="de"/>  <modeCode code="ESP" displayName="Expressed spoken" codeSystem="2.16.840.1.113883.5.60" codeSystemName="HL7:LanguageAbilityMode"/>  <proficiencyLevelCode code="E" displayName="Excellent" codeSystem="2.16.840.1.113883.5.61" codeSystemName="HL7:LanguageAbilityProficiency"/>  <preferenceInd value="true"/></languageCommunication>
hl7:languageCode
CS 0 … 1 cdaemrez
  CONF
Der Wert von @code muss gewählt werden aus dem Value Set 1.2.40.0.34.10.173 ELGA_HumanLanguage (DYNAMIC)
hl7:modeCode
CE 0 … 1 cdaemrez
  CONF
Der Wert von @code muss gewählt werden aus dem Value Set 1.2.40.0.34.10.175 ELGA_LanguageAbilityMode (DYNAMIC)
hl7:proficiencyLevelCode
CE 0 … 1 cdaemrez
  CONF
Der Wert von @code muss gewählt werden aus dem Value Set 1.2.40.0.34.10.174 ELGA_ProficiencyLevelCode (DYNAMIC)
hl7:preferenceInd
BL 0 … 1 cdaemrez
Eingefügt 1 … * M von 1.2.40.0.34.11.20002 HeaderAuthor (DYNAMIC)
hl7:author
1 … * M cdaemrez
@typeCode
0 … 1 F AUT
@contextControlCode
0 … 1 F OP
  Beispiel <author typeCode="AUT" contextControlCode="OP">
  <time value="20161019133608+0100"/>  <assignedAuthor classCode="ASSIGNED">
    <!-- ... -->
  </assignedAuthor>
</author>
hl7:functionCode
CE 0 … 1 cdaemrez
  Beispiel <functionCode code="OA" displayName="Diensthabender Oberarzt" codeSystem="1.2.40.0.34.99.111.2.1" codeSystemName="Amadeus Spital - Funktionscodes"/>
hl7:time
TS.AT.TZ 1 … 1 cdaemrez
  Beispiel <time value="20080324082015+0100"/>
hl7:assignedAuthor
1 … 1 cdaemrez
@classCode
0 … 1 F ASSIGNED
  Beispiel <assignedAuthor classCode="ASSIGNED">
  <id extension="ied8984938" root="1.2.276.0.76.3.1.139.933"/>  <assignedPerson classCode="PSN" determinerCode="INSTANCE">
    <!-- ... -->
  </assignedPerson>
</assignedAuthor>
hl7:id
II 1 … * cdaemrez
  Beispiel <id root="1.2.40.0.34.99.111.1.3" extension="1111" assigningAuthorityName="Amadeus Spital"/>
hl7:code
CE 0 … 1 cdaemrez
  CONF
Der Wert von @code muss gewählt werden aus dem Value Set 1.2.40.0.34.10.6 ELGA_AuthorSpeciality (DYNAMIC)
  Beispiel <code code="GYN" displayName="Gynäkologe" codeSystem="1.2.40.0.34.99.111.2.2" codeSystemName="Amadeus Spital - Fachrichtungscodes"/>
hl7:telecom
TEL.AT 0 … * cdaemrez
Auswahl 1 … 1 Elemente in der Auswahl:
  • hl7:assignedPerson
  • hl7:assignedAuthoringDevice
hl7:assignedPerson
 … 1 cdaemrez
  Beispiel <assignedPerson classCode="PSN" determinerCode="INSTANCE">
  <name>
    <!-- ... -->
  </name>
</assignedPerson>
Eingefügt von 1.2.40.0.34.11.90001 PersonElements (DYNAMIC)
@classCode
0 … 1 F PSN
@determinerCode
0 … 1 F INSTANCE
hl7:name
PN 1 … 1 cdaemrez
hl7:assignedAuthoringDevice
 … 1 cdaemrez
@classCode
0 … 1 F DEV
@determinerCode
0 … 1 F INSTANCE
  Beispiel <assignedAuthoringDevice classCode="DEV" determinerCode="INSTANCE">
  <manufacturerModelName>xxx</manufacturerModelName>  <softwareName>yyy</softwareName></assignedAuthoringDevice>
hl7:manufacturerModelName
SC 1 … 1 cdaemrez
hl7:softwareName
SC 1 … 1 cdaemrez
hl7:representedOrganization
1 … 1 M cdaemrez
  Beispiel <representedOrganization classCode="ORG" determinerCode="INSTANCE">
  <id root="1.2.40.0.34.99.111.1.3" extension="1111"/>  <name>
    <!-- ... -->
  </name>
</representedOrganization>
hl7:id
II 1 … * M cdaemrez
hl7:name
ON 1 … 1 M cdaemrez
hl7:telecom
TEL.AT 0 … * cdaemrez
hl7:addr
AD 0 … 1 cdaemrez
Eingefügt 1 … 1 M von 1.2.40.0.34.11.20004 HeaderCustodian (DYNAMIC)
hl7:custodian
1 … 1 M cdaemrez
@typeCode
0 … 1 F CST
  Beispiel <custodian typeCode="CST">
  <assignedCustodian classCode="ASSIGNED">
    <!-- ... -->
  </assignedCustodian>
</custodian>
hl7:assignedCustodian
1 … 1 M cdaemrez
@classCode
0 … 1 F ASSIGNED
  Beispiel <assignedCustodian classCode="ASSIGNED">
  <representedCustodianOrganization classCode="ORG" determinerCode="INSTANCE">
    <!-- ... -->
  </representedCustodianOrganization>
</assignedCustodian>
hl7:representedCustodianOrganization
1 … 1 M cdaemrez
@classCode
0 … 1 F ORG
@determinerCode
0 … 1 F INSTANCE
  Beispiel <representedCustodianOrganization>
  <id root="1.2.40.0.34.99.111.0.1" assigningAuthorityName="GDA Index"/>  <name>Amadeus Spital</name>  <telecom value="tel:+43.(0)50.55460-0"/>  <addr>
    <streetName>Hafenstraße</streetName>    <houseNumber>47-51</houseNumber>    <postalCode>4020</postalCode>    <city>Linz</city>    <state>Oberösterreich</state>    <country>AUT</country>  </addr>
</representedCustodianOrganization>
hl7:id
II 1 … 1 R cdaemrez
  Beispiel <id root="1.2.40.0.34.99.111.0.1" assigningAuthorityName="GDA Index"/>
hl7:name
1 … 1 M cdaemrez
  Beispiel <name>Amadeus Spital</name>
hl7:telecom
TEL.AT 0 … 1 cdaemrez
hl7:addr
AD 1 … 1 M cdaemrez
hl7:dataEnterer
NP cdaemrez
hl7:informationRecipient
NP cdaemrez
hl7:authenticator
NP cdaemrez
Eingefügt 1 … 1 M von 1.2.40.0.34.11.20006 HeaderLegalAuthenticator (DYNAMIC)
hl7:legalAuthenticator
1 … 1 M cdaemrez
@typeCode
0 … 1 F LA
hl7:time
TS.DATE.MIN 1 … 1 cdaemrez
  Beispiel <time value="20080324082015+0100"/>
hl7:signatureCode
CS 1 … 1 M cdaemrez
@code
CONF 1 … 1 F S
hl7:assignedEntity
1 … 1 M cdaemrez
Eingefügt von 1.2.40.0.34.11.90003 AssignedEntityElements (DYNAMIC)
hl7:id
II 1 … * R cdaemrez
hl7:addr
AD 0 … 1 cdaemrez
hl7:telecom
TEL.AT 0 … * cdaemrez
hl7:assignedPerson
1 … 1 cdaemrez
Eingefügt von 1.2.40.0.34.11.90001 PersonElements (DYNAMIC)
@classCode
0 … 1 F PSN
@determinerCode
0 … 1 F INSTANCE
hl7:name
PN 1 … 1 cdaemrez
hl7:representedOrganization
0 … 1 cdaemrez
Eingefügt von 1.2.40.0.34.11.90002 OrganizationElements (DYNAMIC)
@classCode
0 … 1 F ORG
@determinerCode
0 … 1 F INSTANCE
hl7:id
II 0 … * cdaemrez
hl7:name
ON 1 … 1 cdaemrez
hl7:telecom
TEL.AT 0 … * cdaemrez
hl7:addr
AD 0 … 1 cdaemrez
hl7:participants
NP cdaemrez
hl7:relatedDocument
NP cdaemrez
hl7:inFulfillmentOf
NP cdaemrez
hl7:documentationOf
1 … * M cdaemrez
  Beispiel <documentationOf>
  <serviceEvent>
    <code code="KASSEN" displayName="Kassenrezept" codeSystem="1.2.40.0.10.1.4.3.4.3.3" codeSystemName="ELGA_MedikationRezeptart"/>    <effectiveTime>
      <low value="{Beginn des Gültigkeitszeitraums des Rezepts}"/>      <high value="{Ende des Gültigkeitszeitraums des Rezepts}"/>    </effectiveTime>
  </serviceEvent>
</documentationOf>
hl7:serviceEvent
1 … 1 M cdaemrez
hl7:code
CE 1 … 1 cdaemrez
  CONF
Der Wert von @code muss gewählt werden aus dem Value Set 1.2.40.0.34.10.68 ELGA_MedikationRezeptart (DYNAMIC)
hl7:effectiveTime
IVL_TS 1 … 1 M cdaemrez
hl7:low
TS.DATE.MIN 1 … 1 M Beginn des Gültigkeitszeitraums
Befüllungsvorschrift gemäß Rezept-pflichgesetz:
Bei Kassen- und Privatrezepten: Muss immer mit dem aktuellen Datum befüllt sein.
Bei Substitutionsrezepten: Datum frei wählbar.
cdaemrez
hl7:high
TS.DATE.MIN 1 … 1 M Ende des Gültigkeitszeitraums
Befüllungsvorschrift gemäß Rezept-pflichgesetz:
Bei Kassenrezepten: Fix: Beginn des Gültigkeitszeitraums + 1 Monat + 1 Tag
Bei Privatrezepten: Mindestens: Beginn des Gültigkeitszeit-raums + 1 Monat + 1 Tag; Maximal: Beginn des Gültigkeitszeit-raums + 1 Jahr
Bei Substitutionsrezepten: Datum frei wählbar, aber später als das Beginndatum.
cdaemrez
hl7:performer
NP cdaemrez
hl7:authorization
NP cdaemrez
hl7:componentOf
NP cdaemrez
hl7:component
cdaemrez
@typeCode
0 … 1 F COMP
@contextConductionInd
0 … 1 F true
hl7:structuredBody
cdaemrez
@classCode
0 … 1 F DOCBODY
@moodCode
0 … 1 F EVN
hl7:component
1 … 1 Beinhaltet 1.2.40.0.34.11.8.1.2.1 Rezept Section (DYNAMIC) cdaemrez
treeblank treeblank wo [hl7:section [hl7:templateId [@root='1.2.40.0.34.11.8.1.2.1']] [hl7:templateId [@root='1.3.6.1.4.1.19376.1.9.1.2.1']] [hl7:templateId [@root='1.3.6.1.4.1.19376.1.5.3.1.3.19']] [hl7:templateId [@root='2.16.840.1.113883.10.20.1.8']]]
@typeCode
0 … 1 F COMP
@contextConductionInd
0 … 1 F true