Back To Index  <<  Back To Templates

active Template  Antikörper-Bestimmung Laboratory Observation Entry

Id 1.2.40.0.34.6.0.11.3.16 Gültigkeit 2021‑04‑29 11:09:58
Andere Versionen mit dieser Id:
Status active Aktiv Versions-Label 1.0.1+20210512
Name eimpf_entry_AntikoerperBestimmungLaboratoryObservation Bezeichnung Antikörper-Bestimmung Laboratory Observation Entry
Kontext Elternknoten des Template-Element mit Id 1.2.40.0.34.6.0.11.3.16
Klassifikation CDA Entry Level Template
Offen/Geschlossen Geschlossen (nur definierte Elemente sind erlaubt)
Assoziiert mit
Assoziiert mit 1 Konzept
Id Name Datensatz
elgaimpf-dataelement-271 draft Analyse draft Datensatz e-Impfpass 2019
Benutzt von / Benutzt
Benutzt von 0 Transactions und 0 Templates, Benutzt 3 Templates
Benutzt als Name Version
1.2.40.0.34.6.0.11.9.1 Inklusion active Narrative Text Reference (1.0.1+20210512) DYNAMIC
1.2.40.0.34.6.0.11.9.28 Containment active Performer Body - Laboratory (1.0.0+20210219) DYNAMIC
1.2.40.0.34.6.0.11.3.11 Containment active Comment Entry (1.0.0+20210219) DYNAMIC
Beziehung Version: Template 1.2.40.0.34.6.0.11.3.16 Antikörper-Bestimmung Laboratory Observation Entry (2019‑08‑05 14:17:12)
Spezialisierung: Template 1.3.6.1.4.1.19376.1.3.1.6 (DYNAMIC)
ref
?

Spezialisierung: Template 1.2.40.0.34.6.0.11.3.27 Laboratory Observation (DYNAMIC)
ref
at-cda-bbr-
Beispiel
Strukturbeispiel Quantitativ
<hl7:observation classCode="OBS" moodCode="EVN">
  <hl7:templateId root="1.2.40.0.34.6.0.11.3.16"/>  <hl7:templateId root="1.3.6.1.4.1.19376.1.3.1.6"/>  <hl7:id root="1.2.3.999" extension="--example only--"/>  <hl7:code code="7961-6" codeSystem="2.16.840.1.113883.6.1" displayName="Masern AK qn."/>  <hl7:text>
    <hl7:reference value="#OBS-1-1"/>  </hl7:text>
  <hl7:statusCode code="completed"/>  <hl7:effectiveTime value="20190201092200+0100"/>  <!-- Angabe des Messwerts 0.07 IU/ml -->
  <hl7:value unit="[IU]/mL" value="0.07" xsi:type="PQ"/>  <hl7:interpretationCode code="N" codeSystem="2.16.840.1.113883.5.83" displayName="normal"/>  <hl7:entryRelationship typeCode="COMP" contextConductionInd="true">
    <!-- template 1.2.40.0.34.6.0.11.3.11 'Comment Entry' (2019-02-07T13:10:44) -->
  </hl7:entryRelationship>
  <hl7:referenceRange typeCode="REFV">
    <hl7:observationRange classCode="OBS" moodCode="EVN.CRT">
      <hl7:text>
        <hl7:reference value="#OBSREF-1-1"/>      </hl7:text>
      <hl7:value xsi:type="IVL_PQ">
        <hl7:low value="0" unit="[IU]/mL"/>        <hl7:high value="0.15" unit="[IU]/mL" inclusive="false"/>      </hl7:value>
      <hl7:interpretationCode code="POS" codeSystem="2.16.840.1.113883.5.83"/>    </hl7:observationRange>
  </hl7:referenceRange>
  <hl7:performer>
    <!-- template 1.2.40.0.34.6.0.11.9.28 'Laboratory Performer Body' (2019-05-15T16:35:36) -->
  </hl7:performer>
</hl7:observation>
Beispiel
Strukturbeispiel Titer ("ausreichend Antikörper")
<hl7:observation classCode="OBS" moodCode="EVN">
  <hl7:templateId root="1.2.40.0.34.6.0.11.3.16"/>  <hl7:templateId root="1.3.6.1.4.1.19376.1.3.1.6"/>  <hl7:id root="1.2.3.999" extension="--example only--"/>  <hl7:code code="50694-9" codeSystem="2.16.840.1.113883.6.1" displayName="Röteln-Virus-Antikörper-Titer HHT (RVTH)"/>  <hl7:text>
    <hl7:reference value="#OBS-1-1"/>  </hl7:text>
  <hl7:statusCode code="completed"/>  <hl7:effectiveTime value="20190201092200+0100"/>  <!-- Angabe des Titers "1:64"als Datentyp Ratio -->
  <hl7:value xsi:type="RTO">
    <hl7:numerator value="1" xsi:type="INT"/>    <hl7:denominator value="64" xsi:type="INT"/>  </hl7:value>
  <!-- Angabe der Interpretation der Messung "POS" bedeutet ausreichend -->
  <hl7:interpretationCode code="POS" codeSystem="2.16.840.1.113883.5.83" displayName="Positive"/>  <hl7:entryRelationship typeCode="COMP" contextConductionInd="true">
    <!-- template 1.2.40.0.34.6.0.11.3.11 'Comment Entry' (2019-02-07T13:10:44) -->
  </hl7:entryRelationship>
  <hl7:referenceRange typeCode="REFV">
    <hl7:observationRange classCode="OBS" moodCode="EVN.CRT">
      <hl7:text>
        <hl7:reference value="#OBSREF-1-1"/>      </hl7:text>
      <!-- Angabe des Titers-Grenzwertes "1:≥32" als Datentyp Ratio -->
      <value xsi:type="RTO">
        <numerator value="1" xsi:type="INT"/>        <denominator xsi:type="IVL_INT">
          <low value="32" inclusive="true"/>        </denominator>
      </value>
      <hl7:interpretationCode code="POS" codeSystem="2.16.840.1.113883.5.83"/>    </hl7:observationRange>
  </hl7:referenceRange>
  <hl7:performer>
    <!-- template 1.2.40.0.34.6.0.11.9.28 'Laboratory Performer Body' (2019-05-15T16:35:36) -->
  </hl7:performer>
</hl7:observation>
Item DT Kard Konf Beschreibung Label
hl7:observation
(eimdotsion)
 
target
elgaimpf-dataelement-271 draft Analyse draft Datensatz e-Impfpass 2019
@classCode
cs 1 … 1 F OBS
@moodCode
cs 1 … 1 F EVN
hl7:templateId
II 1 … 1 M ELGA (eimdotsion)
@root
uid 1 … 1 F 1.2.40.0.34.6.0.11.3.16
hl7:templateId
II 1 … 1 M IHE PaLM Laboratory Observation (eimdotsion)
@root
uid 1 … 1 F 1.3.6.1.4.1.19376.1.3.1.6
hl7:id
II 0 … 1 Identifikation des Tests. (eimdotsion)
wo [not(@nullFlavor)]
hl7:code
CE 1 … 1 R Codierung der Analyse / des Tests. (eimdotsion)
@codeSystemName
st 1 … 1 R
@displayName
st 1 … 1 R
  CONF
Der Wert von @code muss gewählt werden aus dem Value Set 1.2.40.0.34.6.0.10.13 eImpf_Antikoerperbestimmung_VS (DYNAMIC)
  Schematron assert role red error  
  test not(@nullFlavor) or not(@nullFlavor='OTH') or hl7:translation  
  Meldung Wenn code/@nullFlavor=OTH dann MUSS code/translation anwesend sein.  
Eingefügt 0 … 1 von 1.2.40.0.34.6.0.11.9.1 Narrative Text Reference (DYNAMIC)
Der Text zum Laborergebnis wird verwendet, um einen Verweis zum narrativen Text herzustellen
hl7:text
ED 0 … 1 (eimdotsion)
hl7:reference
TEL 1 … 1 M Die Referenz auf den entsprechenden Text im menschenlesbaren Teil muss durch Bezugnahme auf den Inhalt[@ID] angegeben werden: reference[@value='#xxx'].
Die Referenz ist mit einem ID-Attribut anzugeben, dieses Element DARF NUR den Textinhalt des codierten Inhalts mit Zusatzinformationen umschließen.

Alternativ kann @value auch mit dem url-scheme "http" oder "https" beginnen.


(eimdotsion)
@value
1 … 1 R
  Schematron assert role red error  
  test starts-with(@value,'#') or starts-with(@value,'http')  
  Meldung The @value attribute content MUST conform to the format '#xxx', where xxx is the ID of the corresponding 'content'-element, or begin with the 'http' or 'https' url-scheme.  
hl7:statusCode
CS 1 … 1 M Statuscode. Auswahl:
  • completed“ für einen abgeschlossenen Test.
  • aborted“ für einen stornierten Test (konnte nicht durchgeführt werden)
(eimdotsion)
  CONF
@code muss "completed" sein
oder
@code muss "aborted" sein
Auswahl 1 … 1
Medizinisch relevantes Datum und Zeit. In der Regel Abnahmedatum/-zeit des Spezimen.
Elemente in der Auswahl:
  • hl7:effectiveTime[not(@nullFlavor)]
  • hl7:effectiveTime[@nullFlavor='UNK']
hl7:effectiveTime
IVL_TS 0 … 1 Medizinisch relevantes Datum und Zeit. In der Regel Abnahmedatum/-zeit des Spezimen. (eimdotsion)
wo [not(@nullFlavor)]
@value
ts 1 … 1 R
hl7:effectiveTime
IVL_TS 0 … 1 (eimdotsion)
wo [@nullFlavor='UNK']
@nullFlavor
cs 1 … 1 F UNK
Auswahl 1 … 1 Elemente in der Auswahl:
  • hl7:value[@xsi:type='PQ']
  • hl7:value[@xsi:type='IVL_PQ']
  • hl7:value[@xsi:type='INT']
  • hl7:value[@xsi:type='IVL_INT']
  • hl7:value[@xsi:type='BL']
  • hl7:value[@xsi:type='ST']
  • hl7:value[@xsi:type='CV']
  • hl7:value[@xsi:type='TS']
  • hl7:value[@xsi:type='CD']
  • hl7:value[@xsi:type='RTO']
  • hl7:value[@xsi:type='RTO_QTY_QTY']
  • hl7:value[@xsi:type='RTO_PQ_PQ']
hl7:value
PQ 0 … 1 R
Ergebnis der Analyse codiert entsprechend dem Datentyp.
KANN bei stornierten Analysen entfallen.
Unterelemente können je nach Datentyp notwendig sein, z.B. high/low für IVL oder numerator/denominator für RTO.
(eimdotsion)
wo [@xsi:type='PQ']
hl7:translation
PQR 0 … 1 Alternative Repräsentation derselben physikalischen Größe, mit unterschiedlicher Einheit in @code und @codeSystem und einem möglicherweise unterschiedlichen Wert. (eimdotsion)
hl7:value
IVL_PQ C (eimdotsion)
wo [@xsi:type='IVL_PQ']
hl7:value
INT C (eimdotsion)
wo [@xsi:type='INT']
hl7:value
IVL_INT C (eimdotsion)
wo [@xsi:type='IVL_INT']
hl7:value
BL C (eimdotsion)
wo [@xsi:type='BL']
hl7:value
ST C (eimdotsion)
wo [@xsi:type='ST']
hl7:value
CV C (eimdotsion)
wo [@xsi:type='CV']
hl7:value
TS C (eimdotsion)
wo [@xsi:type='TS']
hl7:value
CD C (eimdotsion)
wo [@xsi:type='CD']
hl7:value
RTO C (eimdotsion)
wo [@xsi:type='RTO']
  Beispiel
Beispiel für Titer ("1:64")
<value xsi:type="RTO">
  <numerator value="1"/>  <denominator value="64"/></value>
hl7:value
RTO_QTY_QTY C (eimdotsion)
wo [@xsi:type='RTO_QTY_QTY']
hl7:value
RTO_PQ_PQ C (eimdotsion)
wo [@xsi:type='RTO_PQ_PQ']
  Schematron assert role red error  
  test not(hl7:value/@nullFlavor)  
  Meldung Die Verwendung von value/@nullFlavor ist nicht erlaubt  
hl7:interpretationCode
CE 0 … 1 Codierte Bewertung des Ergebnisses. 
Mögliche Einträge  aus ObservationInterpretationDetection:
  • POS: Für Immunisierung sind ausreichend Antikörper nachweisbar 
  • NEG: Für Immunisierung sind NICHT ausreichend Antikörper nachweisbar 
  • IND: Grenzwertiger Antikörper-Spiegel 
(eimdotsion)
  CONF
Der Wert von @code muss gewählt werden aus dem Value Set 1.2.40.0.34.10.13 ELGA_ObservationInterpretation (DYNAMIC)
hl7:performer
0 … * Externes Labor, das die Untersuchung durchgeführt hat
Beinhaltet 1.2.40.0.34.6.0.11.9.28 Performer Body - Laboratory (DYNAMIC)
(eimdotsion)
hl7:participant
0 … 1 Validierende Person. (eimdotsion)
@typeCode
cs 1 … 1 F AUTHEN
@contextControlCode
cs 0 … 1 F OP
hl7:templateId
II 1 … 1 R (eimdotsion)
@root
uid 1 … 1 F 1.3.6.1.4.1.19376.1.3.3.1.5
hl7:time
IVL_TS 0 … 1 R (eimdotsion)
hl7:participantRole
1 … 1 R (eimdotsion)
@classCode
cs 0 … 1 F ROL
hl7:id
II 0 … 1 R (eimdotsion)
hl7:addr
AD 1 … 1 R (eimdotsion)
hl7:telecom
TEL.AT 1 … * R (eimdotsion)
hl7:playingEntity
1 … 1 M (eimdotsion)
@classCode
cs 0 … 1 F ENT
@determinerCode
cs 0 … 1 F INSTANCE
hl7:name
PN 1 … 1 M (eimdotsion)
hl7:entryRelationship
0 … * Beinhaltet 1.2.40.0.34.6.0.11.3.11 Comment Entry (DYNAMIC) (eimdotsion)
@typeCode
cs 1 … 1 F COMP
@contextConductionInd
cs 0 … 1 F true
hl7:referenceRange
0 … * Es können mehrere Referenzbereiche angegeben werden. Diese müssen mit dem InterpretationCode unter Verwendung von ObservationInterpretationDetection unterschieden werden. (eimdotsion)
@typeCode
cs 1 … 1 F REFV
hl7:observationRange
1 … 1 M (eimdotsion)
@classCode
cs 1 … 1 F OBS
@moodCode
cs 1 … 1 F EVN.CRT
hl7:text
ED 1 … 1 M (eimdotsion)
hl7:reference
TEL 1 … 1 M (eimdotsion)
Auswahl 0 … 1 Elemente in der Auswahl:
  • hl7:value[@xsi:type='IVL_PQ']
  • hl7:value[@xsi:type='RTO']
hl7:value
IVL_PQ 0 … 1 (eimdotsion)
wo [@xsi:type='IVL_PQ']
hl7:low
PQ 1 … 1 R (eimdotsion)
hl7:high
PQ 1 … 1 R (eimdotsion)
hl7:value
RTO 0 … 1 (eimdotsion)
wo [@xsi:type='RTO']
hl7:numerator
INT 1 … 1 M (eimdotsion)
@value
int 1 … 1 F 1
hl7:denominator
IVL_INT 0 … 1 R (eimdotsion)
hl7:low
IVXB_INT 0 … 1 (eimdotsion)
hl7:high
IVXB_INT 0 … 1 (eimdotsion)
hl7:interpretationCode
CE 1 … 1 M POS: Der angegebene Referenzbereich entspricht einem für Immunisierung ausreichenden Antikörper-Spiegel ("Immunisierung gegeben") (eimdotsion)
wo [not(@nullFlavor)]
@code
CONF 1 … 1 F POS
@codeSystem
1 … 1 F 2.16.840.1.113883.5.83 (Observation Interpretation)